Project-Tucson-VietNam7

Hyundai Tucson Upgraded with a 12-Speaker Full Rebec Car Audio System | Installed by AudioZone Vietnam

Hyundai Tucson Upgraded with a 12-Speaker Full Rebec Car Audio System | Installed by AudioZone Vietnam Hyundai Tucson – A Full Rebec Audio Build in Vietnam The Hyundai Tucson is a popular compact SUV, combining a spacious cabin with the practicality required for everyday driving. For this project in Vietnam, the vehicle received a comprehensive…

Hyundai Tucson Upgraded with a 12-Speaker Full Rebec Car Audio System | Installed by AudioZone Vietnam

Hyundai Tucson – A Full Rebec Audio Build in Vietnam

The Hyundai Tucson is a popular compact SUV, combining a spacious cabin with the practicality required for everyday driving. For this project in Vietnam, the vehicle received a comprehensive 12-speaker Rebec audio system, with particular attention paid to system integration, custom fabrication and installation aesthetics.

The project was completed by AudioZone Vietnam and later competed at EMMA Vietnam 2025.

Project-Car-Hyundai-Tucson

Rebec RS6.3 3-Way Front Stage

The main front stage is built around the Rebec RS6.3 3-way speaker system, consisting of the Rebec RS28 tweeter, RS90 midrange and RS165 midbass.

Custom A-Pillar Installation – Rebec RS28 & RS90

The Rebec RS28 tweeter and RS90 midrange are installed in custom-fabricated A-pillars.

During fabrication, careful attention was given to both installation requirements and the original interior design of the Tucson. The speaker pods were positioned to comply with the EMMA 4 cm visibility rule, ensuring that the installation does not obstruct the driver’s field of vision.

Rather than treating the A-pillars purely as functional speaker mounts, AudioZone integrated the pods into the cabin as a design element. Their sculpted forms and illuminated accents create a distinctive appearance while remaining visually integrated with the vehicle interior.

Rebec RS165 Midbass – Custom Door Installation

The Rebec RS165 midbass drivers are installed securely in the front doors.

The original door area was custom-fabricated around the speaker position, creating a stronger visual presence than a conventional OEM-style installation. The redesigned speaker surrounds introduce a more dynamic and individual character while integrating the RS165 into the overall design language of the project.

Rebec RX6A Rear Speakers

The rear stage uses Rebec RX6A speakers, providing dedicated rear-channel reproduction as part of the complete 12-speaker system.

Together with the RS6.3 front stage and dual-subwoofer section, these speakers are individually incorporated into the multi-channel DSP architecture.

Rebec RPX-B12S – The Center of the System

Signal processing and main speaker amplification are handled by the Rebec RPX-B12S DSP amplifier.

For this Tucson project, its high-level output channels are assigned as follows:

CH1: RS28 – Front Left Tweeter
CH2: RS28 – Front Right Tweeter
CH3: RS90 – Front Left Midrange
CH4: RS90 – Front Right Midrange
CH5: RS165 – Front Left Midbass
CH6: RS165 – Front Right Midbass
CH7: RX6A – Rear Left Speaker
CH8: RX6A – Rear Right Speaker

The remaining DSP channels are used for the low-level subwoofer signal:

CH11: D1200 – Subwoofer 1
CH12: D1200 – Subwoofer 2

This configuration allows the individual sections of the system to be managed through a centralized DSP architecture while dedicated mono amplifiers handle the power requirements of the two subwoofers.

Dual Rebec WL10 Subwoofer System

The luggage compartment is home to one of the visual highlights of the project: two Rebec WL10 subwoofers installed in a custom sealed enclosure.

The enclosure was fabricated specifically for the available space behind the rear seats and accommodates both WL10 drivers in a single integrated structure.

Both subwoofers use an inverted show-style mounting arrangement. Their cones operate toward the inside of the enclosure, leaving the baskets and magnet assemblies exposed to view.

This configuration turns the functional subwoofer installation into an important visual feature of the entire project.

Two Rebec D1200 Class D Mono Amplifiers

The dual WL10 subwoofer system is powered by two Rebec D1200 Class D mono amplifiers, with a dedicated amplifier driving each subwoofer.

Separating the subwoofer amplification from the main RPX-B12S amplifier provides a clear system architecture: the DSP amplifier manages the front and rear speaker channels and signal processing, while the two D1200 amplifiers are dedicated to the low-frequency section.

Rebec RPX-B12S
DSP Amp Rebec RPX-B12S

Custom Trunk Design – Audio Meets Installation Art

The luggage compartment was designed not simply to accommodate the equipment, but to present it as an integrated part of the project.

The dual WL10 subwoofers form the visual centerpiece, while the amplifier installation is positioned above them within a multi-level custom panel structure.

Integrated LED lighting follows the contours of the installation, creating a three-dimensional visual effect around the equipment. The combination of geometric panels, exposed subwoofer structures and lighting gives the trunk a distinctive show-car character.

Importantly, the design language is not limited to the luggage compartment. Similar illuminated details appear around the custom A-pillar and door speaker installations, creating visual continuity throughout the vehicle.

 

Built by Hand

A significant part of this project lies behind the finished surfaces.

The custom A-pillars, door speaker structures and trunk installation required individual fabrication to adapt the audio equipment to the Tucson’s interior. From shaping and finishing the panels to integrating the speakers and lighting, the installation demonstrates the craftsmanship involved in creating a competition-oriented car audio build rather than simply replacing factory components.

3rd Place – SQ-E3000 at EMMA Vietnam 2025

Beyond its custom installation and comprehensive Rebec system, this Hyundai Tucson was also entered into EMMA Vietnam 2025, a competition season featuring more than 60 participating vehicles.

The project achieved the 3rd Place Cup in the SQ-E3000 category.

The result gives this build significance beyond its visual presentation: it is a completed Rebec audio project that was installed, tuned and evaluated within a competitive car audio environment.

EMMA Viet Nam 2025

A Complete Rebec Project from Vietnam

This Hyundai Tucson brings together a 12-speaker full Rebec system, multi-channel DSP processing, dedicated subwoofer amplification and extensive custom fabrication.

At the front, the RS6.3 3-way system combines RS28 tweeters, RS90 midranges and RS165 midbass drivers. RX6A speakers provide the rear stage, while two WL10 subwoofers form the dedicated low-frequency section. System processing is centered around the RPX-B12S, with two D1200 Class D mono amplifiers dedicated to the dual subwoofers.

From the custom A-pillars and redesigned door speaker locations to the illuminated dual-WL10 trunk installation, AudioZone Vietnam developed the system with both audio integration and presentation in mind.

Its 3rd Place result in SQ-E3000 at EMMA Vietnam 2025 completes the story of a Rebec project designed not only to be seen and heard, but also to enter the competition arena.

OUR CASE OTHER

VinFast Fadil Upgraded with Rebec Car Audio System | Installed by AudioZone Vietnam

VinFast Fadil – Rebec Car Audio Upgrade in Vietnam The VinFast Fadil is a compact hatchback from Vietnamese automaker VinFast, designed for practical everyday driving. In this project, AudioZone Vietnam upgraded the vehicle with a complete Rebec audio system featuring...

Read more